Function Description:

1. Maximum test range of magnetic flux density: 0-19999 Gs / measurement error percentage% ± 1dig.

2. Zero adjustment: adjust the environmental geomagnetic offset before measurement to make the Gauss display value return to zero.

3. Gain adjustment: use a standard magnet to do magnetic retrospective correction, or adjust the display ratio value.

4. Magnetic polarity display: with N pole (+) and S pole (-) indicator.

5. Measurement of magnetic force distribution Scanning speed can be set to 1 to 6 segments of angular velocity measurement with a resolution of 0.01 °.

6. 100 groups of magnetic waveform display color change setting function.

7. The measured magnetic force waveform can cut a magnified display or expand display function of a partial waveform of the magnetic force waveform.

8. Four standard magnetic simulation waveforms.

9. Statistical analysis function, the statistical data of the measurement can be exported as an EXCEL file.

10. Magnetic wave dynamic observation and locking function.

11. Gs-V function and Garea-V function.

12. It can display the three-dimensional waterfall diagram of the 3D magnetic flow field distribution of the motor rotor.

13. Basic setting data of magnetic force waveform test file.

14. Any relevant position points between two points of the magnetic waveform can be observed by two cross mouse cursors.

15. Can choose the dynamic displacement and magnification observation function of the peak wave Gauss value (Y) and extremely wide angle value (X) of magnetic wave

16. Three kinds of setting modes for automatic OK-NG judgment function and two magnetic waveform comparison functions can be selected

17. The same motor is measured 10 times to confirm that the test reproducibility is within (± 1.0% ± 1digt. ± 0.5% uncertainty factor).

18. The 3D X-axis and Z-axis adopt automatic teaching measurement function, and the dynamic coordinates of moving in and out can be set arbitrarily.