Function Description:
1. The upper / lower limit of the total magnetic flux value of each single magnetic pole and total magnetic pole can be set, with automatic display and judgment OK / NG judgment.
2. Drift adjustment: It is suitable for the offset adjustment function of circuit drift and natural variation of the circuit caused by different temperature / humidity and environmental variations in various regions.
3. Zero adjustment with magnetic beam value: It is suitable for zero adjustment of magnetic force in different geomagnetic environments in various regions.
4. Ratio gain adjustment with test value: When the measured value has a proportional error, it can be adjusted to correct its display value or used for instrument calibration.
5. The maximum test peak lock function.
6. The total magnetic beam test value, or the maximum total magnetic beam peak value display zero reset function.
7. Measuring N-S magnetic polarity and test data display function.
8. Measurement mode can be switched to select manual operation or automatic continuous control test mode.
9. Test value ratio file * 0.1 file / * 1 file / * 10 file / * 50 file / * 100 file.
10. Measurement setting data: including customer name, product name, product model, test conditions, magnet material, test date, tester name, file name, etc .; minimum deviation, minimum deviation percentage, maximum deviation, maximum deviation percentage, It can set the upper / lower control range of the total magnetic flux value, and has display / setting / comparison / judgment OK / NG / print mode.
11. Operation procedures and test data transmission mode: with interface output / inputport, can be used with local special control software and computer for signal connection control.