Function Description:
1. Analysis of magnetizing output voltage value is 1V, and magnetizing output voltages are available from 1000V model to 4000V model respectively. (According to the customer's magnetic workpiece for free evaluation and design of applicable models)
2. With the upper/lower control value of the magnetic output voltage, the production parameter condition setting and storage of magnetizing voltage, automatic monitoring and displaying of magnetizing output voltage value during production operation, and controlling the range of magnetizing voltage value, OK-NG Judgment, etc.
3. Maximum output current value range: (designed according to the magnetized workpiece). The upper / lower limit value of magnetizing discharge current, the setting and storage of production parameter conditions of magnetizing discharge current, with automatic monitoring and display of discharge current value and range during production operations, OK-NG judgment and other functions.
4. Charging time: about 2.0-5.0Sec. (The lower the magnetizing output voltage setting, the shorter the charging time).
5. The output voltage stability is within one thousandth, and the output voltage does not change with the input power voltage.
6. All the production setting parameter data are directly input by key, which can quickly input / set / store the magnetizing operation parameter conditions of each model, and can set / store 1000 sets of production parameter conditions of motors of each model.
7. A computer is used to monitor production operations throughout the process. If there is any abnormality in the operation, it will automatically display the abnormality and sound a warning.

8.The production test data of unlimited pen number can be recorded for the analysis of crop rate of production capacity, and the relevant statistical analysis data.
9. Can record unlimited number of production test data, such as: the total number of good products produced by each model and each batch, the analysis of the various abnormal phenomena of each model and each batch of defective products, and the number of abnormal operation data.

10. Equipped with the handheld scanner machine reading BARCODE operation function, connecting the production serial number of the workpiece and verifying the relevant yoke group and magnetization setting parameter conditions and other functions. (You can also purchase the related BAR CODE scanner reader system)
11. Magnetic output OK indicator, magnetizing cycle delay indicator, charging indicator, and various abnormal indicators, to facilitate the operator to identify and use the function.
12. Can preset / display / reset / lock the batch production quantity of the day, the total production quantity of the whole batch, and various abnormal counting functions.
13. It can link the display / comparison and OK-NG judgment of the test data of the total magnetic tester, and connect the production test data of the magnetic operation on the same report. (Relevant equipped with total magnetic tester can be purchased separately)